Audison Prima APS 10 S4S 10" Shallow mount Car SubWoofer

The Audison Prima APS 10 S4S is optimised for enclosures with a reduced volume starting from 10 liters. The configuration of the single 4Ω voice coil makes it ideal to be driven by the new AP F8.9 bit amplifier with a built-in DSP that delivers an outstanding 260 W RMS with two channels bridged. 

Also interesting, is the possibility to create custom enclosures with two APS 10 S4S driven by the AP 1D amplifier using the 540 W RMS delivered on the 2Ω load resulting from the drivers connected in parallel.

Product Features:

• Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility.
• Designed to deliver maximum performance in a sealed enclosure starting from 10 litres.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to minimum.
• Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
• Massive motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
• Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Single voice coil design specifically developed to be combined with either AP F8.9 bit (2 CH bridged - 260 W RMS) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
• Steel mesh grille and plastic gasket included.

Technical Specifications:

• Component - Subwoofer
• Size - 250mm (10")
• Power Handling - 400 W Continuous Power, 800 W Peak Power
• Impedance - 4+4 Ω
• Magnet Size - 140mm (5.51") x 70mm (2.76") x 30mm (1.18")
• Weight of one speaker - 5.24 Kg (11.56 lb)
• Voice Coil Ø - 60.5mm (2.38")