AUDISON APS10S4S 10" Single Voice Coil 4-ohm 800w Subwoofer with Grille

The APS 10 S4S is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The single voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion.

Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

Product Features:

• Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility.
• Designed to deliver maximum performance in a sealed enclosure starting from 10 lt.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to minimum.
• Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
• Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
• Water-repellent pressed paper 10 in. cone featuring a profile developed with simulation and optimized with the Klippel Scan Vibrometer.
• Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers.
• Steel mesh grille and plastic gasket included.

Specifications:

• Size - 250 mm
• Power Handling - Peak - 800 W
• Power Handling - Continuous - 400 W
• Impedance - 4 Ohm
• Magnet Material - HIGH DENSITY FLUX FERRITE
• Woofer Qes - 0,75
• Cone Material - WATER REPELLENT PRESSED PAPER
• Xmax - 12.6 mm
• Xmech -18 mm
• weight - 5.24 kg
• Dimension A 270 mm
• Dimension B 233 mm
• Dimension C 105 mm
• Dimension D 88 mm