Provide input signal for your amp
Aftermarket amplifiers and DSP sound processors need clean and strong input signals, whether they come from a receiver's RCA outputs or a factory amp's speaker outputs. AudioControl's LC1i line output converter can produce up to 9.5 volts of preamp-level output in either case, acting as a line driver using its RCA inputs or as a line output converter using the speaker-level inputs.
Works with factory amps
Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier, enabling you to retain all your vehicle's factory audio options and warnings. The LC1i's level control with a Maximized LED indicator helps you to keep the signal strength, as well as under control and distortion-free.
Product Features:
- Speaker Level Input: 1 (2 channels)
- Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting)
- Speaker Level Input Impedance (selectable): 20Ω, 60Ω, 20kΩ
- Line Level Input: 1 (2 channels)
- Line Level Input Impedance: 7kΩ
- Preamp Outputs: 1 (2 channels)
- Maximum Output Level: 9.5Vrms/13V peak
- Output Gain: +/- 12 dB
- Output Impedance: 150Ω
- Total Harmonic Distortion: 0.01%
- Signal to Noise: >110 dB
- Frequency Response: 20 Hz – 50 kHz ±1 dB
- Remote In / GTO™ Signal Sense / Audio Sense
- 12VDC Remote Out (always active when unit is on)
- Current Draw: 120 mA
- Recommended Fuse Rating: 1 A
- Dimensions: 4.8″L x 3″D x 1″H (including speaker connectors)
- Weight: 0.55 lbs. (0.25 kg)
- Full Manufacturer's Warranty
- UK Autorised Dealer
- Next-day delivery Availability
What's in the box:
- Two-channel line-output converter
- Two 4-pin captive-screw connectors (installed)
- Instructions/Specs/Warranty on packaging
Price | £99.99 |
---|---|
Manufacturer | AudioControl |
Vehicle Manufacturer | None |