Power galore
Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's DM-6.1200 6-channel amplifier puts out 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. And if you're into bass, you could bridge this amp to 3-channel mode to drive three subwoofers with 400 watts RMS each, 1200 watts in total.
Active controls for active systems
This amp will work well with a 3-way system that uses a pair of tweeters, midrange speakers, and subs. Highly adjustable crossover networks let you set high-pass, low-pass, and bandpass filters so each driver gets only the frequencies it was designed to play. AudioControl's AccuBASS® circuit ensures maximum bass performance, even if you're connected to a factory radio that normally turns down the lower frequencies as you turn the volume up
Add a kick to your factory stereo
AudioControl designed the LC-6.1200 to work equally well with aftermarket and factory stereos. Eight active speaker-level inputs allow you to connect to almost any factory radio, with signal summing accommodating the separate bass, midrange, and treble signals found in some factory systems. Signal-sensing circuitry turns the amp on, via the front speaker-level inputs, so you won't need to run a remote turn-on wire throughout your vehicle.
Convenient features
Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional wired remote can be assigned to each and every channel pair so you can control the volume from the front seat.
Important Note: Some factory radios and amplifiers will not work without sensing that its speakers are connected to their outputs. If you don't have output from your factory system after installing this amplifier, you'll need an AudioControl AC-LGD load-sensing adapter (sold separately) to correct the issue.
LC-6.1200 connection panel
Product Features:
- AudioControl LC-6.1200
- Class-D Full Range 2-Ohm Stable 6-Channel Amplifier
- Easily integrated into most OEM source units
- RMS Power Rating:
-
- 4 ohms: 125 watts x 6 chan.
- 2 ohms: 200 watts x 6 chan.
- 1 ohm: ------------N/A------------
- Bridged, 4 ohms: 400 watts
-
- Total power output: 1,200 watts
- 6/5/4/3/2 or Mono channel operation
- GTO Signal Sense turns on and off automatically detects signal when it comes in or turns off
- AccuBASS enhances low-end signal lost in factory systems
- Summable active speaker-level inputs for factory integration
- 3-way Linkwitz-Riley crossover networks
- 6 Preamp inputs
- 2 assignable preamp outputs
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy-duty aluminum alloy heat-sink
- Frequency Response: 10 - 30,000 Hz
- Total Harmonic Distortion (THD): <.01%
- Signal to Noise Ratio: 102 dBA, ref 200 watts @ 2 ohm
- Variable high-pass filter: 30 - 300 Hz
- Variable low-pass filter: 500 - 5,000 Hz
- Fuse Rating: 40 A x 3
- 4 to 0 gauge power and ground wiring are recommended for installation.
- Optional bass control knob, AudioControl ACR-1 available
- LED power (green) and protect (red) indicators
- Dimensions: 12"W x 7.95"L x 2.10"H
- UK Internet Dealer
- Manufacturer's Warranty
- Next-day Delivery Available
What's in the Box:
- 6-Channel amplifier
- 2.5 mm Allen wrench
- Quick Start Guide
Price | £899.99 |
---|---|
Manufacturer | AudioControl |
Vehicle Manufacturer | None |