AudioControl ACX-600.6 6-channel powersports/marine amplifier — 50 watts RMS x 6

Power survival

What's the point in installing an amp on your ATV if the amp won't survive when you spray off your vehicle after a day of fun in the dirt and mud? AudioControl's ACX-600.6 six-channel amplifier carries an IPX6 waterproof rating, which means a powerful water jet spray won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections.

Play your music loud and clear

The ACX-600.6 can send out 50 watts RMS per channel — plenty enough to hear your music clearly over the sounds of wind and motor. Like it loud? This amp can also operate in three-channel mode to power three high-performance speakers with 200 watts RMS each. Or it can drive four speakers with 50 watts each while powering a sub with 200 watts. Selectable high-pass filters help you achieve the best tone possible for your speakers.

Note: If powering a subwoofer, a low-pass filter is required and not included.

Some practical features

This tiny amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. To simplify setup, a set of LEDs indicate when you've set the amplifier's gains for "Maximized" performance.

ACX-600.6 controls with cover removed

Product Features:

• Compact High Power 6-Channel Amplifier
• High Current Design
• 6 x 50 Watts @ 4 Ohms
• 6 x 100 Watts @ 2 Ohms
• 3 x 200 Watts @ 4 Ohms, Bridged Mono
• 12 dB/Octave Linkwitz-Riley Alignment Crossover
• GTO™ Signal Sense (Great Turn On)
• 6 Speaker-level/ Line-Level RCA Inputs
• All-weather IPX6 rated!
• Filled with home-grown audio goodness
• UK Internet Dealer
• Full Manufacturer's Warranty
• Nex-day Delivery Available

Technical Specifications:

Performance

• Frequency Response: 26 Hz – 22 kHz
• Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm
• THD+N: < 0.05%
• Fuse Rating: 1 x 30 A
• Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
• IP Rating: IPX6

Inputs

• Preamp / Speaker Level Inputs: 2
• Input Voltage Low: 500 mV – 6 Vrms
• Input Voltage Range High: 1 Vrms - 12 Vrms

Outputs

• Rated Continuous (RMS) Power at 14.4V:
• 4 Ω – 50 W RMS x 4
• 2 Ω – 100 W RMS x 6
• Bridged 4 Ω - 200 W RMS x 3

Weights & Dimensions

• Dimensions: 11.97″ W x 5.31″ D x 2.36″ H
• Weight: 5.4 lbs. (2.45 kg)