SEE OTHER PRODUCTS BY Audio Technica
ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
Product Features:
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration
Specification:
| Turntable | |
|---|---|
| Type | Fully Automatic, Belt-Drive |
| Motor | DC motor |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | Less than 0.2% WRMS (33 1/3 RPM) at3kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec |
| Phono Pre-Amp Gain | 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised |
| Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
| Power Consumption | 2W |
| Dimensions | 435 mm ×353 mm×128 mm (W×D×H) |
| Weight | 5.2kg |
| Accessories Included | Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
| Cartridge & Stylus | |
|---|---|
| Model | AT91R |
| Type | VM Dual Magnet |
| Output Voltage | 3.5mV (mV at 1kHz, 5 cm/sec) |
| Vertical Tracking Force Range | 1.5 to 2.5g (standard 2.0g) |
| Stylus Construction | 0.6 mil bondedconical |
| Cantilever | Aluminium pipe |
| Recommended Load Impedance | 47,000 ohms |
| Weight | 5.0g |
| Headshell | |
|---|---|
| Model | AT-HS3 |
| Weight | 11.1g |
| Overhang Adjustment | 8mm |
| Tonearm |
|---|
| Type | Static balanced straight shaped with soft damping control |
| Effective Length | 221.5mm |
| Overhang | 19mm |
| Maximum Tracking Error Angle | Less than 3° |
| Stylus Pressure Adjustment Range | 1 to 4g |
| Applicable Cartridge Weight | 14.5 to 20g |
| Anti-skating Range | 0 - 3 g |
| Price | £269.99 |
|---|---|
| Manufacturer | Audio Technica |
| Vehicle Manufacturer | None |
Write Your Own Review
SEE OTHER PRODUCTS BY Audio Technica