SEE OTHER PRODUCTS BY Alpine
Next-Generation 25cm (10") S-Series Subwoofer with Dual 4-Ohm Voice Coils
Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.
The S2-W10D4 25cm (10") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fibre and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2 Ohm to 8 Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.
The New 2024 S-Series Subwoofers
Add extra punch to your sound system with the S-Series S2-W10D4 10" (20cm) subwoofer; now redesigned for powerful and reliable bass performance at an approachable price point.
Performance & Value
With an impressive power handling of 300W RMS and a peak power handling of 900W, the Next-Gen 8” S-Series Subwoofers deliver outstanding performance value. Boasting a wide frequency response range of 35Hz to 215Hz and a sensitivity of 83dB (SPL@1W/1m), these subs ensure powerful and accurate bass reproduction across a diverse range of music genres.
HAMR Surround
The Next-Generation S-Series Subwoofers contains Alpine’s High Amplitude Multi-Roll (H.A.M.R.) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 15mm of one-way excursion that creates incredible accuracy from the subwoofer.
Enhanced Punch
Featuring the lightweight yet sturdy combination of carbon fiber and polypropylene, the Next-Gen S-Series Subwoofer cone delivers deep, low-distortion bass that enhances the depth and richness of your music.
Flexible Application
A Dual Voice Coil (DVC) with easy configuration jumpers makes installing the S-Series subwoofers a breeze. A new twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone.
Perfect Power Match
Maximize the potential of your S-Series subwoofers with Alpine’s perfectly power-matched S-Series amps. Power a single S2-W10D4 subwoofer effortlessly with the 600W S2-A60M mono amplifier, or for an even bigger impact, pair two or more S2-W8D4 subs with the powerful 1200W S2-A120M amp to ensure optimal sound quality and performance.
Sizes & Variations
The new S-Series subwoofers are available in 12”, 10” and 8” size configurations and come in dual 2Ω and dual 4Ω impedances.
Made for S-Series Amps & Subs
The S-Series speakers are designed to perfectly match the Alpine S-Series amplifier and subwoofer line for perfect system building. S-Series components are designed for customers who want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.
General
- 10" Dual 4 ohms S Series Subwoofer
- Power Handling:
- Peak: 1800 watts
- RMS: 600 watts
- Carbon Fiber Polypropylene Cone
- High Amplitude Multi-Roll (HAMR) Rubber Surround
- Twist-lock grille mount system
- Poly Propylene / Ceramic Dust Cap
- 2.6" High-Temperature Copper Voice coil
- 15 mm Xmax
- 64 oz. Single Stacked Ferrite magnet motor structure
- Frequency Response: 25 - 215 Hz
- Sensitivity: 84.9 dB
- Sealed box volume: 0.4 cubic feet - 0.85 cubic feet
- Ported box volume: 0.75 cubic feet - 1.3 cubic feet
- Top-mount depth: 4.54"
- Cutout diameter: 8.94"
- Amp recommendations: Alpine S2-A60M and Alpine S2-A120M
- UK Internet Dealer
- Full Manufacturer's Warranty
What's in the box:
- One 10" Dual 4-ohm voice coil subwoofer
- Trim ring (installed)
- Two 3" jumper cables (each has a single banana connector on each end)
- Subwoofer Application Guide (English/ French)
- On-line product registration information (English/ French/ Spanish)
- Warranty information (English/ French)
- Important Notice! (English/ French)
Product history:
 |
Alpine S2-W10D4
(newest, current model)
|
 |
Alpine S-W10D4
(previous model, replaced by Alpine S2-W10D4)
|
 |
Alpine Type-S SWS-10D4
(previous model, replaced by Alpine S-W10D4)
|
 |
Alpine SWS-1043D
(previous model, replaced by Alpine Type-S SWS-10D4)
|
 |
Alpine SWS-1042D
(previous model, replaced by Alpine SWS-1043D)
|
 |
Alpine SWS-1041D Type S 10"
(previous model, replaced by Alpine SWS-1042D)
|
|
Alpine SWR-1040D Type R 10"
(previous model, replaced by Alpine SWS-1041D Type S 10")
|
| Price | £209.99 |
|---|---|
| Manufacturer | Alpine |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY Alpine