Add aftermarket/ retain original camera on Hyundai /Kia cars (OEM NAVIGATION and 24 Pin Connector) 27-253

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars with a factory fitted navigation system.

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: Only suitable for select Hyundai and Kia car models with factory-fitted navigation systems and a 24 Pin connection

Installation

To retain/ keep the factory reverse camera when installing an aftermarket unit

• Connect the Black wire to the chassis ground
• Connect the red wire to the accessory power, please use a voltage converter to provide the camera with the correct voltage
• Connect the male Yellow RCA plug to the reverse camera input of the aftermarket radio

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

To add an aftermarket camera to the original system screen

• Connect the Black wire to the ground wire of the aftermarket camera
• Connect the power wire of the aftermarket camera to accessory power
• Connect the female Yellow RCA plug to the aftermarket camera
• Tape off and disregard the Red wire, it is not required 

Compatible with select vehicle models

Hyundai

Elantra 2017

Elantra GT 2016-2017

Genesis Sedan 2016

Santa Fe 2017

Santa Fe Sport 2017

Sonata 2015-2017

Tucson 2016-2017

Veloster 2016-2017

KIA

Cadenza 2017

Forte 2017

Niro 2017

Optima 2016-2017

Sedona 2015-2017

Sorento 2016-2017

Soul 2014-2017

Sportage 2017