Vauxhall Stereo Fitting Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia Surround Panel, Wiring loom and Stereo Removal Keys.
- Double Din Fascia Adaptor (Black)
- Wiring Harness
- Stereo Removal Keys
Compatible with the following vehicles
|Vauxhall||Antara||2006 - 2015|
|Vauxhall||Astra H||2004 - 2010|
|Vauxhall||Corsa||2006 - 2014|
|Vauxhall||Zafira||2005 - 2014|
The Lose Red wire on the harness MUST be connected to a separate ignition feed in the vehicle to make an aftermarket head unit to power up
Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night but in not necessary to connect
Blue wire on the aerial adaptor needs to be connected to an Electric Car Antenna or ANT labelled wire on the wirinh harness of your new radio
Suitable for vehicles that had 4 digit original e.g CR2005 stereo or vehicles that had 2 digit e.g CD30 original stereo. Steering controls are not supported with this kit.
FASCIA ADAPTOR: This adaptor will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicle's interior.
WIRING HARNESS: The wiring harness will allow to install the stereo without having to cut any wires.
STEREO REMOVAL KEYS: Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer-specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.