Rockford Fosgate PM1000X1BD Monoblock 1000Watt Punch Marine Class-bd Amplifiers

A powerful amp made for powersports

Rockford Fosgate built their PM1000X1bd mono amplifier for marine, motorcycle, and Powersports applications. If you demand powerful bass while you're blasting along a trail or waterway, this compact amp has all the power you need

The PM1000X1bd features a conformal-coated circuit board

Boost your bass wherever you go

Ultra-efficient Class-bd circuit topology helps the PM1000X1bd deliver maximum boom for your bucks. This versatile amp will operate safely with loads as low as 1 ohm, so you can send up to 1000 watts RMS to a single dual voice coil sub or to a multi-sub setup.

Made for long life and easy installation

Life on the water or in the dirt can be hard on electronics, so the PM1000X1bd is built tough. Conformal-coated circuitry withstands moisture and dirt, while the stainless steel hardware won't succumb to corrosion. Rockford Fosgate also uses the newest Maximum Efficiency Heat Sink Application (MEHSA3) construction process, which yields up to five times better heat transfer than traditional mounting techniques. As a result, this amp will rock out without overheating, even when tucked into a compact space.

Level setting made easy

The PM1000X1bd uses Rockford Fosgate's CLEAN level setting technology, so there's no more guesswork while setting your gain levels. Easy-to-see LED indicators identify clipping so you can set your amp up for maximum performance while eliminating distortion.

Product Features:

• Monoblock Punch Series Class-bd Marine Amplifier
• RMS Power Rating:
• • 4 ohms: 300 watts x 1 chan.
  • 2 ohms: 500 watts x 1 chan.
  • 1 ohms: 1000 watts x 1 chan.
• Dynamic Power:
• • 4 ohms: 491 watts x 1 chan.
  • 2 ohms: 874 watts x 1 chan.
  • 1 ohms: 1,430 watts x 1 chan.

Includes a Rockford Fosgate Performance Verification Certificate
w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")

• CEA-2006 compliant amplifier
• CE Compliant
• LED power (blue) and protect (red) indicators
• Features C.L.E.A.N. Set-up with 10-step set-up procedure
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• Preamp RCA outputs to daisy chain multiple amps
• Dual speaker terminals simplify the hookup of multiple speakers
• Balanced Differential Inputs, to eliminate noise picked up by signal cables
• Protected against Dust, UV, & Corrosion
• Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
• High level input capable with Auto Turn-On circuit:
• • Requires Rockford Fosgate RFIF2SW, sold separately
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• Input sensitivity: 150 mV - 12 V
• Frequency Response: 20 - 250 Hz
• Efficiency (average): 86% @ 4-Ohm
• Total Harmonic Distortion (THD): <1.0%
• Punch EQ Bass: 0 - +18dB boost @ 45Hz.
• 12dB/octave Butterworth crossover (selectable)
• Selectable subsonic/infrasonic filter: off / 28 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Recommended Fuse Rating: 140A x 1 inline (not included)
• Operating Voltage: 9 - 16 VDC
• Max Current Draw: 130 A
• Average Current Draw: 65 A
• Power Wire Gauge: 4 AWG - 8 AWG
• Speaker Wire Gauge: 8 AWG - 18 AWG
• 4 gauge OFC power and ground wiring is recommended for installation. 
• Dimensions: 7.76"W x 13.28"L x 2.38"H
• Authorised Internet Dealer
• 1-year Manufacturer's Warranty