{"product_id":"audi-mmi-3g-3g-plus-hdd-2019-navigation-map-update-package-8r0060884ga","title":"Audi MMI 3G+, 3G Plus HDD 2024 Navigation Map Update Package - 8R0060884GA","description":"\u003cp\u003eThis is the latest available 2024 road map database update for Audi MMI 3G+, 3G Plus (3GP) HDD Navigation systems. Everything is included for this update to be installed in the comfort of your own home in approximately 1-2 hours, no dealer interventions required and easy to follow installation instructions can be found here.\u003c\/p\u003e \u003cp\u003eThis also includes a firmware update.\u003c\/p\u003e \u003cp\u003eYou can check your current firmware and database version by going into Setup -\u0026gt; Settings -\u0026gt; Version Information. This will update your navigation database and system firmware to the following versions:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMedia Version: HN+_EU_AU3G_K0942_3 \/ HN+R_EU_AU_K0942_4\u003c\/li\u003e \u003cli\u003eNav. database version: 8R0060884GA ECE 6.28.2\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eMMI 3G+, 3GP HDD navigation systems can be identified by checking the MMI Media version, you can do this by going into Setup -\u0026gt; Settings -\u0026gt; Version information. Compatible media versions always begin with HN+. Please see an example below:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHN+_EU_AU3G_XXXXX_X \/ HN+R_EU_AU_XXXXX_X\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure which navigation system your car is fitted with, please contact us.\u003c\/p\u003e \u003cp\u003eMMI 3G+, 3GP HDD systems are usually fitted in the following models:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAudi A1\/S1 (2011 - 2018)\u003c\/li\u003e \u003cli\u003eAudi A4\/S4\/RS4 (2008 - 2016)\u003c\/li\u003e \u003cli\u003eAudi A5\/S5\/RS5 (2008 - 2017)\u003c\/li\u003e \u003cli\u003eAudi A6\/S6\/RS6 (2009 - 2015)\u003c\/li\u003e \u003cli\u003eAudi A7\/S7\/RS7 (2011 - 2014)\u003c\/li\u003e \u003cli\u003eAudi A8\/S8 (2008 - 2017)\u003c\/li\u003e \u003cli\u003eAudi Q3\/RSQ3 (2012 - 2018)\u003c\/li\u003e \u003cli\u003eAudi Q5\/SQ5 (2009 - 2017)\u003c\/li\u003e \u003cli\u003eAudi Q7 (2010 - 2015)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCountries\u003c\/strong\u003e\u003cbr\u003eAndorra, Belgium, Denmark, Germany, Estonia, Finland, France, Gibraltar, Greece, Great Britain, Ireland, Italy, Croatia, Latvia, Liechtenstein, Lithuania, Luxembourg, Monaco, Netherlands, Norway, Austria, Poland, Portugal, Russia, San Marino, Sweden, Switzerland, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Vatican City\u003c\/p\u003e \u003cp\u003eIn order to be able to react to traffic information, TMC or TMCpro provides services in the following countries: Belgium, Denmark, Germany, France, Great Britain, Italy, Netherlands, Austria, Sweden, Switzerland, Spain and the Czech Republic.\u003c\/p\u003e \u003cp\u003eLanguages supported: English, German, French, Italian, Dutch, Portuguese, and Spanish.\u003c\/p\u003e \u003cdiv class=\"section-header text-center\"\u003e \u003cp class=\"article__title\"\u003e\u003cstrong\u003e[HOW TO] Audi MMI 3G+, 3G Plus Navigation \u0026amp; Firmware Update\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"rte\"\u003e \u003cp\u003eThis is a tutorial on how to update the media version and navigation database version on Audi MMI 3G Plus systems.\u003c\/p\u003e \u003cp\u003ePrerequisites -\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnect your car with a battery charger OR leave the engine running during the update procedure.\u003c\/li\u003e \u003cli\u003eSwitch off the headlights, seat heating and climate control system.\u003c\/li\u003e \u003cli\u003eRemove all SD Cards\/CD’s\/DVD’s from the MMI system before beginning.\u003c\/li\u003e \u003cli\u003eTurn the ignition on, and let the MMI system initialise for 1-2 minutes before beginning.\u003c\/li\u003e \u003cli\u003eDo not remove the SD card or DVD from the MMI system during the update.\u003c\/li\u003e \u003cli\u003eIf your current firmware version is \"HN+_DAB_K0097,\" it does not need to be updated. You can skip the media version upgrade instructions.\u003c\/li\u003e \u003cli\u003eIf your current firmware version is below “HN+_EU_AU3G_K0942_3” or \"HN+R_EU_AU_K0942_4\" it must be updated.\u003c\/li\u003e \u003cli\u003eRead the complete guide before you start.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWARNING: DO NOT use update files downloaded off the internet, Audi updates MUST be modified depending on the equipment fitted to the car. You will lose all audio if an incorrect update is applied to the car. All of our update packages are tailored to your car, specifically to prevent any chance of failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Updating the Media Version -\u003c\/strong\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003eEnter the Engineering Menu by pressing the CAR button and immediately after that the BACK button. Hold both buttons down for a few seconds. \u003c\/li\u003e \u003cli\u003eInsert the Firmware Update DVD into the DVD slot on the dashboard and wait 2 minutes.\u003c\/li\u003e \u003cli\u003eSelect the “Update” option on the MMI by pressing the bottom right selection button around the central control knob.\u003c\/li\u003e \u003cli\u003eSelect “CD\/DVD” as the source by pressing down on the central control knob.\u003c\/li\u003e \u003cli\u003eSelect the firmware update by pressing down on the central control knob.\u003c\/li\u003e \u003cli\u003eSelect “Standard”.\u003c\/li\u003e \u003cli\u003eYou will see a list with all the categories that the firmware will update. Scroll down to the bottom and select “Start update” .\u003c\/li\u003e \u003cli\u003eSelect “Start”.\u003c\/li\u003e \u003cli\u003eAfter several minutes\/hours (it depends on what needs to be updated) the firmware update will be completed. The system may reboot several times. Once the system reboots, the MMI will display the update progress of various devices. This is carried out automatically and does not require you to take any action.\u003c\/li\u003e \u003cli\u003eOnce the update is complete, a “Device Summary” screen will appear. Scroll down to the bottom and select “Continue”. \u003c\/li\u003e \u003cli\u003eSelect “Cancel Documentation”. The system will reboot one final time. The update is now complete.\u003c\/li\u003e \u003cli\u003eIn order to proceed in updating the map database, it must be confirmed that the firmware has been updated successfully to the latest version. To verify this please allow the MMI system to initialise for 5 minutes. Now go into “Setup MMI”, scroll down to the bottom and select “Version information”. The Media version should now be “HN+_EU_AU3G_K0942_3” or \"HN+R_EU_AU_K0942_4\". \u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e\u003cstrong\u003eUpdating the Nav. Database version\u003c\/strong\u003e - \u003c\/p\u003e \u003col\u003e \u003cli\u003ePlease remove the firmware update DVD from the car.\u003c\/li\u003e \u003cli\u003eEnter the Engineering Menu by pressing the CAR button and immediately after that the BACK button. Hold both buttons down for a few seconds. \u003c\/li\u003e \u003cli\u003eInsert the Map SD Card into SD card slot 1 on the dashboard and wait 2 minutes.\u003c\/li\u003e \u003cli\u003eSelect “Update” option on the MMI by pressing the bottom right selection button around the central control knob.\u003c\/li\u003e \u003cli\u003eSelect “SD 1” as the source and press down on the central control knob.\u003c\/li\u003e \u003cli\u003eSelect the Navigation Update by pressing down on the central control knob.\u003c\/li\u003e \u003cli\u003eSelect “Standard”.\u003c\/li\u003e \u003cli\u003eYou will see a list with all the categories that the navigation database will update. Scroll down to the bottom and select “Start update” .\u003c\/li\u003e \u003cli\u003eSelect “Start”.\u003c\/li\u003e \u003cli\u003eAfter several minutes\/hours (it depends on what needs to be updated) the navigation update will be completed. The system may reboot several times. Once the system reboots, the MMI will display the update progress of various devices. This is carried out automatically and does not require you to take any action.\u003c\/li\u003e \u003cli\u003eOnce the update is complete, a “Device Summary” screen will appear. Scroll down to the bottom and select “Continue”. \u003c\/li\u003e \u003cli\u003eSelect “Cancel Documentation”. The system will reboot one final time. The update is now complete.\u003c\/li\u003e \u003cli\u003eIn order to proceed in activating the map database, it must be confirmed that the navigation database has been updated successfully to the latest version. To verify this please allow the MMI system to initialise for 5 minutes. Now go into “Setup MMI”, scroll down to the bottom and select “Version information”. The Nav. Database version should now be “8R0060884GA ECE 6.28.2”. If the map database has not been updated to “8R0060884GA ECE 6.28.2” or is blank please switch the car off for 1 hour and check again. If the issue still persists please email us via the Contact Us page.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e\u003cstrong\u003eActivating the map database\u003c\/strong\u003e -\u003c\/p\u003e \u003col\u003e \u003cli\u003ePlease remove the Navigation Update SD card from the car.\u003c\/li\u003e \u003cli\u003eInsert the activation SD card into SD card slot 1 and wait 15-30 seconds.\u003c\/li\u003e \u003cli\u003ePress down on the central control knob once and then remove the SD card.\u003c\/li\u003e \u003cli\u003eWait 1 minute\u003c\/li\u003e \u003cli\u003ePerform a system reboot by pressing the MENU BUTTON, CENTRAL CONTROL KNOB and UPPER RIGHT SELECTION BUTTON simultaneously. The screen will go black as you lift your fingers off the buttons and the system will restart.\u003c\/li\u003e \u003cli\u003eThe activation is now complete.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e: The activator we supply is a one-time use FSC code. It becomes married to your car's VIN upon installation. \u003cstrong\u003eDO NOT\u003c\/strong\u003e attempt to use the activator in more than one vehicle. \u003cstrong\u003eDoing so WILL\u003c\/strong\u003e cause the system to enter the component protection mode. You have been warned!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: that it may be necessary to take the car for a short drive post install to calibrate the navigation system\u003c\/p\u003e \u003c\/div\u003e \u003c!-- product description --\u003e\u003c!-- product description --\u003e","brand":"Sat Nav Upgrade","offers":[{"title":"Default Title","offer_id":52760664244490,"sku":"8R0060884GA","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/4578\/4842\/files\/main-menu_1024x1024_2x_1.jpg?v=1774286619","url":"https:\/\/audiovisualworld.co.uk\/products\/audi-mmi-3g-3g-plus-hdd-2019-navigation-map-update-package-8r0060884ga","provider":"Audio Visual World","version":"1.0","type":"link"}