Click image to enlarge

YOU MAY ALSO CONSIDER

JL Audio RBC-1 Bass Controller for JL Amplifiers

JL Audio RBC1 - Remote Bass Knob Control with Cable for Select JL Audio Amplifiers including Amplified Enclosures, HX Series and Slash Series

 

In stock
SKU
RBC-1
Special Price £59.99 Regular Price £69.99 Save £10.00

JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio's A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and a 18' cable are included.

Connect the RBC-1 to your amp, and it converts the amp's selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp's boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp's subwoofer level, from full mute to full volume.

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:

JX-Series: JX250/1, JX500/1, JX1000/1D

When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:

Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 250/1, 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

A satin-finish aluminum knob can be purchased separately.

Product Features:

  • Remote Bass Control
  • Adjust the overall level of the amplifier from the front of the vehicle
  • Intended to be Flush Mounted
  • Low-profile design for custom-look installations
  • Includes 18 ft. control cable
  • Black ABS Knob
  • Black plastic replacement knob available, sold separately: JL Audio Black Knob
  • Satin-Finish Aluminum replacement knob available, sold separately: JL Audio Aluminum Knob
  • Mounting hardware included
  • Also found as: SKU # 98015
  • UK Internet Dealer
  • 1 Year Manufacturer's Warranty

What's in the box:

  • Bass Controller with attached knob and 9" cord terminated by a female RJ-11 port
  • 18' control cable with a male RJ-11 connector on each end
  • 2 Nuts
  • 2 Washers
  • Installation Instructions

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

More Information
Price £69.99
Manufacturer JL Audio
Vehicle Manufacturer None
Write Your Own Review
You're reviewing:JL Audio RBC-1 Bass Controller for JL Amplifiers
Your Rating