JL Audio PowerWedge CS110TG-TW3 - 400W Sealed PowerWedge Truck Style Loaded Enclosure

JL Audio quality in a thin package

The PowerWedge CS110TG-TW3 enclosure pumps out signature JL Audio bass from a small sealed box. Install it anywhere that you might have a little room, like behind a seat or in the trunk, add an amp, and enjoy the extra depth that good bass will add to your system.    

Immense bass

This PowerWedge handles up to 400 watts RMS, housing one 10" TW3 subwoofer that pounds out the impressive low end. JL Audio used its extensive engineering know-how to build a super-thin TW3 subwoofer that offers big performance. The enclosure is matched to the sub for optimum output, and the airtight sealed design delivers powerful, accurate bass 

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure, then finishes it with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring. The enclosure is inspected by hand at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Product Features:

• 10" TW3 (Thin-Line) Series Shallow Mount Subwoofer
• Power Handling:
• RMS: 400 watts
• Recommended Power Range: 200 - 400 watts
• Nominal Impedance: 2-Ohm
• Injection-molded, mica-filled polypropylene cone
• Rubber surround
• No pole vent: permits mounting close to the rear wall of the enclosure.
• Very small sealed enclosure volume requirements
• Very long linear excursion capability
• DMA-optimized motor designs
• Patented concentric tube architecture
• Patented floating cone attach method technology
• Cast alloy frame
• Aluminum-alloy dust cap and rear cap with JL Audio logo
• Precision-built in USA at JL Audios Miramar, Florida factory
• "Tab-Ear" frame design to fit driver in tight spaces
• Free Air Resonance (Fs): 32.30 Hz
• Sensitivity: 82.10 dB
• Xmax: 15.2 mm
• Equivalent Compliance (Vas): 19.82 L
• Frequency response: ~24 ~ 200 Hz
• Matching Amplifiers:
• JL Audio XD300/1v2
• UK Internet Dealer
• Manufacturer's Warranty

Enclosure Features:

• Subwoofer mounting depth: 3-1/2"
• Subwoofer cutout diameter: 11-5/8"
• 5/8" MDF construction
• Sealed enclosure
• Black carpet covered cabinet
• One pair of 5-way binding posts on the left side of the enclosure
• Nickel-plated push terminals
• Dimensions: 4 3/8"D x 7 1/4"D w/ grille x 19 1/8"W x 12 5/8"H