Click image to enlarge

YOU MAY ALSO CONSIDER

Kicker 44KXMA800.5 800W RMS KM Series 2-ohm Stable 5 Channel Class-D Marine Amplifier

Kicker KXMA800.5 (KA44KXMA8005) - 800W RMS KXM Series Marine Class-D 5-Channel Amplifier with Wireless Remote Level Control Knob Included
In stock
SKU
44KXMA800.5
Special Price £549.99 Regular Price £599.99 Save £50.00

YOU MAY NEED

Dependable power for your boat's sound system

Kicker built their KXMA800.5 marine 5-channel amplifier to run your boat's entire system. It can power four speakers with 50 watts RMS each while driving a subwoofer with up to 400 watts RMS. This reliable and compact KXM Series rocker remains cool even when pushed hard, thanks to its high-mass heatsink, high-tech internal components, and efficient full-range Class-D amp technology. Want something a little louder? You could also use this amp in 3-channel mode to send 200 watts RMS each to some high-performance components, and a sub with 400 watts.

3-way system

The KXMA800.5 will also work well powering a 3-way system, with the Amp 1 channels running the tweeters, Amp 2 the midrange speakers, and the Sub channel taking care of the bass.

Made for marine use

This rugged amp features a conformal-coated circuit board for improved water and dust resistance, plus corrosion-resistant power connections, a gasket-sealed front cover, and stainless steel mounting hardware that won't rust all over your boat's gel coat or carpeting.

Connection perfection

Kicker employs their Fail-Safe Integration Technology (FIT2™) to reject noise and stop any interference generated by your boat's electronics, so you'll enjoy your music clean and pure. Speaker-level inputs make it possible to hook this amp up to almost any receiver or radio. Kicker also helps you set this amp's gain properly, by offering free test tones for downloading. You play a tone and turn the gain up until the gain knob glows red. Then, you turn it down until it just goes out, and the amp's gain is set perfectly.

Kicker KXARC

Very cool wireless remote

Kicker's unique KXARC Bluetooth® wireless remote control comes with this amplifier. So from the driver's seat, you can adjust the level of the subchannel, add bass using Kicker's SHOCwave™ bass restorer, switch sub-phase, and get warnings when the subchannel clips.

Versatile controls behind the folding door

A gasket-sealed front door gives you quick and easy access to your amp's controls. You can tune for almost any kind of speaker, as the steeply-sloped high- and low-pass filters offer a wide range of adjustment. The filter section for the rear channels can be set up for bandpass operation — where both the high- and low-pass filters are engaged to allow only the frequencies between them to play — for optimizing the signal for midrange speakers in a 3-way system.

The subwoofer channel includes a bass boost for adding some kick to your music, along with a subsonic filter that eliminates the extra-low, inaudible frequencies that only waste your sub's energy.

Kicker 44KXMA800.5

KXMA800.5 control panel

 



Product Features:

  • Kicker KXM Series KXMA800.5 (44KXMA8005)
  • Class-D 1-Ohm Stable (Sub Ch) 5-Channel Amplifier
  • RMS Power Rating:
      • 4 ohms: 50 watts x 4 chan.
      • 2 ohms: 100 watts x 4 chan.
      • Bridged, 4 ohms: 200 watts x 2 chan
  • Subwoofer Channel Power Rating:
      • 4 ohms: 200 watts x 1 chan.
      • 2 ohms: 400 watts x 1 chan.
      • 1 ohm: 400 watts x 1 chan.
        Note: 2017 KXM amplifier subwoofer channels are 1Ω stable
        power rating equivalent to 2Ω operation, +/- 10%
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • KXARC Wireless Remote Included
  • Speaker-level (high-level) inputs: Kicker KISL requires, sold separately
  • Gain Control With Optimal Input Indicator
  • SHOCwave™ Bass Restoration Processor
  • FIT2 (Fail-Safe Integration Technology) Circuitry
  • DSP-Controlled Preamp
  • ABYC/NMMA Compliant Power Terminals
  • Conformal-Coated Circuit Boards
  • Easy Access to Settings behind Gasket-Sealed Cover Panel
  • Black Anodized Aluminum Chassis
  • Stainless Steel Mounting Hardware Included
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity: 250mV - 10V
  • Frequency Response: 10 - 160 Hz
  • Total Harmonic Distortion (THD) 1%
  • Signal to Noise Ratio: >95dB
  • Selectable crossover mode (front/rear): Off / HP / LP , BP (Rear Only)
  • x1 & x10 Frequency Multiplier, Front & Rear
  • Variable crossover filter (Front): 10 - 500 Hz, 24 dB/octave
  • Variable high-pass filter (Rear): 10 - 500 Hz, 24 dB/octave
  • Variable low-pass filter (Rear): 40 - 500 Hz, 24 dB/octave
  • Variable low-pass filter (Sub): 40 - 160 Hz, 24 dB/octave
  • Subsonic filter: 10 - 80 Hz , 24 dB/octave
  • Fuse Rating: 100A x 1 External Fuse (sold separately)
  • 4 gauge power and ground wiring is recommended for installation. 
  • Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H
  • Authorised UK Internet Dealer
  • 1-year Manufacturer's Warranty

 



Related Products:

More Information
Price £599.99
Manufacturer Kicker
Write Your Own Review
You're reviewing:Kicker 44KXMA800.5 800W RMS KM Series 2-ohm Stable 5 Channel Class-D Marine Amplifier
Your Rating