SEE OTHER PRODUCTS BY JL Audio
Seriously shallow
JL Audio applied all their design know-how to creating the 10TW1-2 subwoofer. This shallow-mount 10" sub works in very small enclosures and, with a mounting depth of only 4-3/8 inches, it'll fit in all kinds of tight places you don't expect a subwoofer to go.
The unique construction, built in the USA
The injection-molded mica-filled polypropylene cone with its rubber surround is housed in a specially designed cast-alloy frame that minimizes resonances. JL Audio builds this sub at their Florida factory, using their patented "concentric tube" design to compress the sub's motor structure for a smaller profile without sacrificing performance.
You can mount this sub right up against the back wall of your enclosure and it requires almost no clearance in front. If you're looking for a subwoofer that brings maximum boom to minimal space, you're looking in the right place.
To drive this single subwoofer, we recommend a mono amplifier rated between 225 and 450 watts RMS at 2 ohms.
Compact sub on a mission
JL Audio designed their TW1 subwoofers for tight spaces and tiny enclosures. Their 10TW1-4 10" subwoofer operates efficiently in an enclosure of only 0.35 cubic feet and, at only 4-3/8" deep, this workhorse will fit in all kinds of tight spots you wouldn't expect a subwoofer to go. You can power this sub with up to 300 watts RMS, so it's perfect for medium-sized systems.
Unique construction
The injection-molded mica-filled polypropylene cone with its rubber surround is housed in a specially designed cast-alloy frame, while JL Audio's patented concentric tube suspension allows the speaker's components to fit together more closely for a smaller profile. If you're looking for a subwoofer that brings maximum boom to minimal space, you're looking in the right place.
Product Features:
- 10" 4-ohm subwoofer
- mica-filled polypropylene injection-molded cone with rubber surround
- power range: 75-300 watts RMS
- peak power handling: 600 watts
- top-mount depth: 4-3/8"
- sealed box volume: 0.35 cubic feet
- ported box volume: 0.625 cubic feet
- Very shallow mounting depth (4.36 in / 111 mm)
- No pole vent: permits mounting close to the rear wall of the enclosure
- Extremely small sealed enclosure volume requirements
- Long linear excursion capability (0.40 in / 10 mm, one-way)
- DMA-optimized motor design
- Patented "concentric tube" architecture
- Patented "floating cone attach method" technology
- Cast alloy frame with flat edges for tight driver grouping
- Injection-molded, mica-filled polypropylene cone
- Rubber surround
- Steel mesh grille included with each driver
- Precision-built in the USA at JL Audio's Miramar, Florida factory
- UK Internet Dealer
- Full Manufacturer's Warranty
Physical Spec
- Overall Diameter (A) 10.375 in / 264 mm
- Mounting Hole Diameter (B) 9.0625 in / 230 mm
- Bolt Hole Circle (C) 9.7 in / 246 mm
- Magnet Diameter (D) 4.54 in / 115 mm
- Mounting Depth (E) 4.36 in / 111 mm
- Front Grille Protrusion (F) 0.87 in / 22 mm
- Driver Displacement 0.047 cu ft / 1.33 L
- Free Air Resonance (Fs) 38.09 Hz
- Electrical “Q” (Qes) 0.639
- Mechanical “Q” (Qms) 10.07
- Total Speaker “Q” (Qts) 0.601
- Equivalent Compliance (Vas) 0.429 cu ft / 12.15 L
- One-Way Linear Excursion (Xmax)* 0.40 in / 10.0 mm
- Efficiency (1 W / 1 m)** 82.2 dB SPL
- Effective Piston Area (Sd) 41.602 sq in / 0.0268 sq m
- DC Resistance (Re) 3.516 Ω
Sealed Enclosure Specifications
- Wall Thickness 0.75 in / 19 mm
- Front Baffle Thickness 0.75 in / 19 mm
- Volume (net int.) 0.35 cu ft / 9.91 L
- External Width (W) 16.125 in / 410 mm
- External Height (H) 14 in / 356 mm
- External Depth (D) 5.25 in / 133 mm
- F3 47.24 Hz
- Fc 56.83 Hz
- Qtc 0.897
What's in the box:
- One 10" Thin-Line subwoofer
- Grille
- Owner's manual
- Online product registration information
| Price | £379.99 |
|---|---|
| Manufacturer | JL Audio |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY JL Audio