JL Audio ACS110LG-TW1 PowerWedge 10" Sub in Active Preloaded Enclosure

Engineered for performance

JL Audio's ACS110LG-TW1 PowerWedge+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact PowerWedge+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low-impedance TW1 10" subwoofer.

Made in the USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, sealed enclosure measures just over 6 inches thick, so it'll fit just about anywhere. You'll enjoy the thick low-frequency responses from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

In PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC-offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with an output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.

Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.

Finish: Black, high-grade automotive carpet with silver "JL AUDIO Built In USA" embroidery on the front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)
Nominal Impedance: 0.25 Ω

Product Features:

• Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω
• System Nominal Impedance       0.25 Ω
• Input Voltage Range @ RCA Inputs        70 mV - 1.40 V RMS
• Input Voltage Range @ High-Level Inputs      280 mV - 5.4 V RMS
• Recommended Copper Power / Ground Wire Gauge     8 AWG wire
• Fuse Rating   30 A (ATO or ATC)
• Enclosure Type     Slot-ported, Low-profile
• Finish     Black carpet
• Grille Included     Black Steel Mesh

Signal Processing

• Filter Modes Low-Pass only
• Filter Slope (dB/Octave)      12 dB
• Filter Frequency Range      50-200 Hz
• Output Polarity Switch       Yes
• Remote Subwoofer Level Control      Optional (RBC-1)

Physical Specifications

• External Width (W)     18.5 in / 470 mm
• External Height (H)     11.125 in / 283 mm
• External Depth (D)      5.0 in / 127 mm
• Net Weight    20.1 lb / 9.12 kg

What's in the box: