Click image to enlarge

YOU MAY ALSO CONSIDER

JL Audio ACS112LG-TW1 PowerWedge 12" Sub in Active Preloaded Enclosure

JL Audio PowerWedge+ ACS112LG-TW1 - 400W Amplified Subwoofer Sealed-Enclosure System with Single 12" 12TW1 Subwoofer

LIMITED STOCK

In stock
SKU
ACS112LG-TW1
Special Price £649.99 Regular Price £679.99 Save £30.00

Engineered for performance

JL Audio's ACS112LG-TW1 PowerWedge+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact PowerWedge+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low-impedance TW1 12" subwoofer.

Made in the USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, sealed enclosure measures just over 6 inches thick, so it'll fit just about anywhere. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

JL Audio DCD™ Amplifier Technology

DCD Amplifier Technology

JL Audio's Direct Conversion Class-D Technology (DCD) is purpose-engineered to be the most efficient subwoofer amplifier on the market while delivering extraordinary output with minimal current draw and heat. DCD amplifiers do away with the losses associated with a traditional "switching power supply", allowing the amplifier to achieve total power efficiencies in the 91 - 94% range. What this means to you is very little heat, ultra-compact size and enough power to fill in the low end of any modest car audio setup. Along with the specifically engineered, low-impedance TW1 driver the system extracts astonishing overall output with unprecedented efficiency.

JL Audio TW1 (Thin-Line) Driver

JL Audio TW1 (Thin-Line) Driver

The TW1 subwoofers offer an unparalleled combination of superb performance and extremely small enclosure requirements, making them an outstanding choice for the MicroSub+ systems. The driver achieves this level of shallow-depth plus performance by compressing the architecture of the TW1 using a "concentric tube" structure that supports the oversized voice coil and the suspension attachments. This permits placing the large motor structure much further forward in the speaker than with conventional designs while maintaining excellent linear excursion capability and mechanical stability. The enclosure's slot-ported design and precise tuning of the TW1 make for the perfect match.

Product Features:

  • Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier
  • Power Output:
  • RMS: 400 Watts Total
  • Preloaded with single 12" TW1 Series Subwoofer Driver - 12TW1-0.25
  • Built-in DCD; Class D amplifier
  • Sealed enclosure with carpet finish
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty

Subwoofer Features:

  • Injection-molded, mica-filled polypropylene cone
  • Rubber surround
  • Cast alloy frame
  • Long linear excursion capability (0.40 in / 10 mm, one-way)
  • DMA-optimized motor design
  • Patented "concentric tube" architecture
  • Patented "floating cone attach method" technology
  • Steel mesh grille included

Amplifier Features:

  • Class D amplifier
  • Input Voltage Range @ RCA Inputs: 70 mV - 1.40 V RMS
  • Input Voltage Range @ High-Level Inputs: 280 mV - 5.4 V RMS
  • 12 dB per octave filter slope
  • Low-pass filter: 50 - 200 Hz
  • Selectable output polarity (i.e. Phase): 0 / 180°
  • Selectable turn-on modes: Sig / DC / REM
  • Automatic turn-on (via signal sensing or DC-offset sensing)
  • High-level speaker input, w/ Molex connection harness
  • Optional bass remote available, sold separately: JL Audio RBC-1
  • Fuse Rating: 30A x 1
  • 8 gauge OFC power and ground wiring is recommended for installation. 

Enclosure Features:

  • V-Groove MDF Construction
  • Automotive-grade vehicle carpet
  • CNC-Cut High-Grade MDF
  • Silver "JL AUDIO Built In USA" embroidery on the front baffle
  • Steel mesh grille mounted with driver
  • Enclosure Dimensions: 6.625" D x 21.00" W x 13.50" H

What's in the box:

  • PowerWedge+ enclosure (loaded with one 12TW1-0.25 subwoofer and built-in amplifier)
  • Black metal grille (installed)
  • Power connection plug (installed)
  • 30-amp ATO fuse (installed)
  • 12" Speaker level r input harness
  • Owner's manual
  • Specification card
  • Warranty information

 

More Information
Price £679.99
Manufacturer JL Audio
Vehicle Manufacturer None
Write Your Own Review
You're reviewing:JL Audio ACS112LG-TW1 PowerWedge 12" Sub in Active Preloaded Enclosure
Your Rating