Make sure you can FiX™ your factory radio sound
Some factory radios and amplifiers will not work without sensing that its speakers (low-impedance loads) are connected to their outputs. So adding a sound processor that uses the factory wiring for its inputs, like a JL Audio FiX 82 or FiX 86, would normally result in no audio at all. JL Audio's FiX-LSA-4 load-sensing adapter plugs in line with your FiX processor's inputs, presenting a load to the factory system, so signal flow gets restored and the music plays on.
The FiX-LSA-4 fixes this problem by providing a lower load impedance so the FiX-82 will work with most factory amplifiers. If you have this problem, the FiX-LSA-4 is the solution!
Product Features:
- 4-channel Load Sensing Adaptor
- Fixes a common problem with connecting the FiX-82 to a factory amplifier
- Provides a lower impedance so the factory amplifier's load-sensing circuit will allow the FiX-82 to work with it
- Full Manufacturer's Warranty
What's in the box:
- FiX-LSA-4 Load Sensing adapter
- Installation Instructions
Price | £69.99 |
---|---|
Manufacturer | JL Audio |
Vehicle Manufacturer | None |
Write Your Own Review