AP F8.9 BIT 8 CH AMPLIFIER WITH 9 CH DSP
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio. The integrated processor is equipped with dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
Product Features:
Full DA - Full Digital Audio
Pure digital signal transfer with a resolution up to 24 bit / 48 kHz.
BIT DRIVER
Auto tuning by Audison bit Tune and communication with bit Drive portal.
DE-EQ - De Equalization
De-equalization function to “flatten” any equalization applied by default by OEM sources.
USS technology
USS technology allows APF 8.9 bit to work with head-units featuring the “speaker load detection” circuit
iDatalink Maestro AR compatibility
When AP bit amplifiers are installed into a compatible vehicle using the iDatalink Maestro AR (sold separately), the user can enjoy perfect integration with factory-installed navigation, advanced safety systems, voice-controlled hands-free and infotainment. (Only for North America)
- Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
- Operating power supply voltage 6.5V ÷17V
- Idling current 1.6 A
- Switched off without DRC 1.7mA
- Switched off with DRC 5 mA
- Consumption @ 14.4 VDC, 2Ω, Max Musical Power 55 A
- Remote IN 6 ÷ 15 VDC (1 mA)
- Remote OUT 4 ÷ 15 VDC (150 mA)
- ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC
- AST - Automatic Signal Turn on/off (Selectable) Speaker-In
- Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0,06%
- Damping factor @ 1 kHz, 4Ω, 2 VRMS > 110
- Bandwidth @ -1.5 dB 10Hz ÷ 22kHz
- S/N ratio (A weighted @ 1 V Input) Master Input 100 dBA
- S/N ratio (A weighted @ 1 V Input) Optical Input 105 dBA
- Input sensitivity Pre-In 0.6 ÷ 6 VRMS
- Input sensitivity Speaker-In 2.2 ÷ 22 VRMS
- Filter type Full / Hi-pass / Low Pass / Band Pass Filter mode and slope
- Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB
- Crossover frequency 68 steps @ 20 ÷ 20k Hz
- Phase control 0° / 180°
- Bass Boost N.1 Adjustable Parametric Pole
- Analog Input Equalizer (20 ÷ 20k Hz) Automatic De-Equalization
- Output Equalizer N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
- Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches
- Time Alignment Delay 0 ÷ 15 ms
- Time Alignment Step 0.08 ms; 2.8 cm / 1.1 inch
- Time Alignment Fine SET 0.02 ms; 0.7 cm / 0.27 inch
- Preset (Drive Preset) Rotary switch for 7 installations Presets
- Acoustic Preset N.2 DSP Memory, DRC selectable
What's in the Box
- AP F8.9 bit amplifier
- Multipolar cable, Rem/Control:
- Multipolar cable, Input Pre-IN:
- Multipolar cable, Input Speakers IN:
- Multipolar cable Speakers OUT:
- 2 - 30 A replacement fuse:
- 1.8 m USB cable:
- 2.5 mm hex key:
- 4 - 4.2 x 50 mm self-tapping, crosshead mounting screws:
- CD ROM containing:
- AP F8.9 bit Software
- This owner’s manual (.pdf) Audio Test Tracks
Price | £1,049.99 |
---|---|
Manufacturer | Audison |
Vehicle Manufacturer | None |