YOU MAY NEED
SEE OTHER PRODUCTS BY Alpine
Alpine introduces a brand new PDP-E800DSP Digital DSP Amplifier.
Are you satisfied with your car stereo’s sound quality?
Anybody with a daily commute of 45 minutes one way spends about 300 hours per year in the car – simply to get to work and back home. Add any other drive and you easily get to over 500 hours per year. While we drive, we all listen to music to keep us entertained. In fact, for most people, the car is the #1 location to enjoy music. So why not invest in a proper sound system that lets you really enjoy your tunes, instead of simply listening to something in the background?! The Alpine PDP-E800DSP is a very versatile, affordable solution to bring amazing sound quality and dynamics into your vehicle.
Highest connection versatility and flexibility
The PDP-E800DSP is extremely versatile and flexible – it can be added on to virtually any factory or aftermarket car entertainment system to build the sound system you require. Connect the DSP amp to your factory system through the 6-channel speaker-level inputs with remote sensing, or alternatively, use the 6-channel pre-amp inputs (RCA). There is also an Optical input (max 24bit / 96kHz) to connect additional sources.
Build your speaker system
You can freely configure the 8 output channels to your needs. Each channel delivers 100 Watts @ 4 Ohms (but limited to 700 Watts total output) and can be configured to be used as a tweeter, midrange, centre or woofer channel. You can also use two channels in parallel for a powerful 200 Watts subwoofer channel. The PDP-E800DSP includes digital crossovers, so you do not need to worry about installing passive crossovers all over the car. With a 20Hz to 22kHz frequency response range for all channels, you can build virtually any system you can think of.
Extensive sound tuning options
With the Alpine DSP amp, you get a professional sound studio out of the box: a 240-band Parametric EQ (30-bands per channel) lets you adjust the sound in great detail. You also get 8-channel digital time correction and an 8-channel digital crossover for a perfect channel setup. Free analog routing allows you, for example, to summarize several channels to create a center channel.
Pure Class-D technology
The Alpine DSP amp uses Class-D amplification technology: this means once an analogue input signal is converted to digital, it remains fully digital throughout the entire processing and amplification stage. With Class-D technology, an amplifier can reach much higher efficiency - meaning less heat production and therefore a much smaller heat-sink. This results in a very small, compact housing, that can be easily placed somewhere in the vehicle (205mm x 150mm x 50mm).
Wireless system control
Download the Alpine Remote Control app for your iPhone or Android smartphone to control all key functions on the go: select input sources, adjust the systems master volume and the subwoofer level, select sound pre-sets and more - there is even a day and night mode. The app is a free download from the Google Play store or the Apple app store.
Start-Stop Engine compatible
The PDP-E800DSP will remain in full operation if your car is running on start-stop mode – meaning no unintended system shut-down when you stop at a crossroad or in a stop-and-go situation.
Bass Knob compatible
You can use the optionally available Alpine RUX-KNOB2 to control the subwoofer level or the master volume of your PDP-E800DSP. This inexpensive accessory can be easily installed somewhere in the dashboard to give you quick access to your subwoofer’s output or the system’s master volume.
Wireless audio playback
If you use an Android phone, you can use the micro USB connection on the Alpine PDP-E800DSP to transfer and enjoy lossless audio files in full bandwidth. You can also connect your phone to the DSP amp using WiFi (a wireless module is included with the PDP-E800DSP). We recommend using the USB Audio Player Pro app for Android.
Expert sound tuning with your PC
Download the Alpine Sound Lab software for PDP-E800DSP from the support area and install it on your PC (compatible with Windows 7, 8 and 10). Connect your PC via USB cable or wirelessly through WiFi to the Alpine PDP-E800DSP to start tuning your audio system.
240-band Parametric EQ and X-Over
The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.
8-Channel Digital Time Correction
Use the graphical user interface to adjust the time delay for each speaker/channel separately. You can adjust the delay by cm, inches or ms. You can also delay whole groups of channels.
Analog routing
With this tool you can setup which input channel is routed to which output channel (in percent). This allows yo, for example, to create a center channel out of 2 front channels.
Source gain adjustment
You can adjust the gain of each analogue input from -15dB to 0dB to achieve the perfect input sensitivity of your source.
Anаlоguе multірlіеr
Wіth thіѕ орtіоn you саn сhооѕе whісh channels tо соmbіnе (proisentally). For example, іt allows уоu to сrеаtе a сhаnnеl 2 frоm thе fіrѕt channel іtѕеlf.
Inрut роwеr setting
It іѕ роѕѕіblе tо сhаngе the level оf еасh аnаlоguе input frоm -15dB tо 0dB tо achieve thе аррrорrіаtе sensitivity for еасh іnрut ѕераrаtеlу.
Product Features:
GENERAL
- 6 high-level inputs for OEM system integration
- 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
- 1 digital TOSLINK/SPDIF input
- Up to 8 speaker outputs with a high power-rating
- 110dB signal-to-noise ratio (digital input)
- Channel separation > 75dB
- USB Device input for DSP setup by PC
- Wireless connection with the separate module (amp setup) for PC only, or wireless audio streaming (smartphone or PC))
- Class-D amplifier with a fully digital audio path
- ADCs by Burr-Brown
- Remote app for iOS and Android with basic control functions (Master level, Sublevel, Preset recall, source selection)
- Pre-amp output (copy from channel 8, for external subwoofer amp)
AMP
- BurrBrown A/D conversion
- Full digital audio path
- High output power capability
- Total power 700 Watt RMS at 4 Ω
- 100 Watt per channel at 4 Ω
- 120 Watt per channel at 2 Ω
- 200 Watt at 2 Ω (2 channels in parallel mode)
- Advanced diagnostics for each output channels (shortcut, overheat, clipping)
- Start-Stop Engine compatible
- Load Capability: 4 – 2 Ω
- Parallelized output supported
DSP
- Latest Analog Device chip (ADAU1452)
- Up to 8 speaker outputs with an independently adjustable output level
- Independent or linkable setups for all output channels
- Delay on each channel up to 14,57ms, 0.01msec steps
- 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
- Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
- Phase Inversion (0,180)
- Master Volume (0 – 42dB)
- Sub control (0 - 15 dB)
- Possibility to save/load up to 6 presets on DSP
- Settings can be secured by certificates
- Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
- EQ ON/OFF possible (for each channel)
- Delay grouping for easier TCR adjustment (up to 4 groups possible)
- TCR ON/OFF for each channel possible
- TCR help calculation for beginners
- Overview page for all settings
- Live monitor (for battery voltage and amp temperature)
- Turn ON by signal or wire
- Alpine RUX-KNOB ready (master volume or sublevel)
- Additional gain on analog input (+6; +9db ). For sources with a lower pre-amp level than 2 Volts
| Price | £999.99 |
|---|---|
| Manufacturer | Alpine |
| Vehicle Manufacturer | None |
SEE OTHER PRODUCTS BY Alpine