Rockford Fosgate PM1000X5 5-Channel Class-AD + D 1000 Watt Marine/ Sports Amplifier

Amp up your marine audio

Rockford Fosgate designed their PM1000X5 5-channel amp to be the center of your high-performance marine or powersports audio system. Run your dash speakers off the front channels, run a pair of stern-mount speakers off the rear channels and run your marine subwoofer(s) off the fifth channel. The PM1000X5 delivers plenty of power efficiently, with Class AB technology handling the front and rear channels, plus Class BD for the sub channel. It's the ideal combination of performance and precision, plus it's built for the demands of boating and off-roading.

Made for long life and easy installation

Life on the water or in the dirt can be hard on electronics, so the PM1000X5 is built tough. Conformal-coated circuitry withstands moisture and dirt, while the stainless steel hardware won't succumb to corrosion. Rockford Fosgate also uses the innovative Maximum Efficiency Heat Sink Application (MEHSA3) construction process, which yields up to five times better heat transfer than traditional mounting techniques. As a result, this amp will rock out without overheating, even when tucked into a tight space. And you won't have to worry about cranking it up for long periods, thanks to tri-stage protection that covers thermal, over-current and short circuits.

Level setting made easy

The PM1000X5 uses Rockford Fosgate's CLEAN level setting technology, so there's no more guesswork while setting your gain levels. Easy-to-see LED indicators identify clipping so you can set your amp up for maximum performance while eliminating distortion

Product Features:

• 5-Channel Punch Series Class-bd Marine Amplifier
• RMS Power Rating: 4 Channel + Sub Channel
• • 4 ohm: 75 watts x 4 chan. + 150 watts x 1 chan.
  • 2 ohm: 125 watts x 4 chan. + 300 watts x 1 chan.
  • 1 ohm: (subwoofer channel only) 500 watts x 1 chan.
• Dynamic Power: 4 Channel + Sub Channel
• • 4 ohm: 115 watts x 4 chan. + 299 watts x 1 chan.
  • 2 ohm: 190 watts x 4 chan. + 540 watts x 1 chan.
  • 1 ohm: (subwoofer channel only) 863 watts x 1 chan.

Includes a Rockford Fosgate Performance Verification Certificate
w/ Inspection Data & Actual Power Rating, (aka "Birth Sheet")

• CEA-2006 compliant amplifier
• LED power (blue) and protect (red) indicators
• Features C.L.E.A.N. Set-up with 10-step set-up procedure
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• 2/4 channel input switch
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• Balanced Differential Inputs, to eliminate noise picked up by signal cables
• Protected against Dust, UV, & Corrosion
• Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen3)
• High level input capable with Auto Turn-On circuit:
• • Requires Rockford Fosgate RFIF2SW, sold separately
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• Input sensitivity: 150 mV - 12 V
• F/R Frequency Response: 20 - 20,000 Hz
• Sub Frequency Response: 20 - 500 Hz
• F/R Efficiency (average): 66% @ 4-Ohm
• Sub Efficiency (average): 80% @ 4-Ohm
• Total Harmonic Distortion (THD): <1.0%
• Punch EQ Bass: 0 - +18dB boost @ 45Hz.
• 12dB/octave Butterworth crossover (selectable)
• Variable high-pass filter (F/R): 50 - 250 Hz, 12 dB/octave
• Selectable subsonic/infrasonic filter (Sub): off / 28 Hz, 12 dB/octave
• Variable low-pass filter (Sub): 50 - 250 Hz, 12 dB/octave
• Recommended Fuse Rating: 150A x 1 inline (not included)
• Operating Voltage: 9 - 16 VDC
• Max Current Draw: 150 A
• Average Current Draw: 75 A
• Power Wire Gauge: 4 AWG
• Speaker Wire Gauge: 12 AWG
• 4 gauge OFC power and ground wiring is recommended for installation. 
• Dimensions: 7.76"W x 15.03"L x 2.38"H
• Authorised Internet Dealer
• 1-year Manufacturer's Warranty