Pioneer GM-A5702 2-Channel 1000w Bridgeable Amplifier with Bass Boost

TECHNOLOGY OF GM SERIES

From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.

VARIABLE LPF

Variable LPF (Low Pass Filter) allows for an adjustable frequency between 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference.

BASS BOOST

Bass Boost featured in the GM-A6704 and GM-A5702 can be set to levels variably from 0 to 12 dB for optimal bass. This precise control can enhance the overall balance and impact of all sounds according to listening preference and music style. The GM-A5702 allows adjustment in three steps: 0 dB, 6 dB or 12 dB.

GROWING POWER, SHRINKING SIZE

New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. 

AUTOMATIC SIGNAL SENSING AND TURN-ON

Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

Product Features:

General

• Number of Channels 2
• Amplifier Class  Class AB
• Maximum Power Output  1000W
• Maximum Power Output at 2 Ohms  500W x 2
• Maximum Power Output at 4 Ohms  300W x 2
• Maximum Power Output - Bridged at 4 Ohms  1000W
• Nominal Power (RMS) Output at 2 Ohms 240W x 2
• Nominal Power (RMS) Output at 4 Ohms 150W x 2
• Nominal Power (RMS) Output - Bridged at 4 Ohms  480W x 1
• Frequency Response  10Hz ~ 70kHz (+0dB , -3dB)
• Total Harmonic Distortion (THD)    <0.05% ( 10W, 1kHz)
• Signal-to-Noise (SN) Ratio    > 96dB
• Fuse Rating  30Ax2

Specifications

• RCA Inputs 2-CH
• Speaker Level Inputs
• Crossover Type  Adjustable LPF
• Low-Pass Crossover Frequency  40-500 Hz
• Low Pass Slope (dB/octave)  -12db/oct
• Bass Boost Frequency  50Hz
• Bass Boost Level  0/6/12dB
• Automatic Signal Sensing and Turn-On
• Hi-Volt Input Level Control 0/6/12dB
• Terminal Type  Screw
• Load Impedance Allowance (Ohm) 2 to 4
• Bridgeable 
• Protection Control System
• Dimensions (WxHxD)(inches)  356(W) X 60(H) X 215(D) mm
• Warranty  1 Year