Click image to enlarge

YOU MAY ALSO CONSIDER

Audison Bit Ten Signal Interface multi-function digital Processor

Audison BitTen - Signal Interface Processor is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market systems into high-performance systems.

 

 

Free Shipping - Use Code 'Audisonfree'
In stock
Only 11 left
SKU
Bit Ten
Free Shipping - Use Code 'Audisonfree'
Special Price £319.99 Regular Price £339.99 Save £20.00
AUDIO PROCESSOR

bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market systems into high-performance system.

Provided with a 32-bit, 147 MHz clock speed DSP as well as 24-bit A/D and D/A converters, bit Ten is controlled by a software specially developed for signal treatment according to the vehicle's acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, and adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.

USS – Universal Speakers Simulator
Thanks to the integration of the USS technology, the bit Nove can also be connected to headunits featuring the “speaker load detection” circuit that would otherwise mute the audio signal output.

During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels. The user can configure the output mode of each channel relative to the installed system.

Tech. Features
Analog Inputs 4 high lev. + 2 pre in
Digital Inputs Not available
Analog Outputs 5
Digital Outputs Not available
Equalizers for each Output 31-band graphic equalizer (1/3 Oct.; ±12dB)
Crossover Filter Type Full / Hi-Pass / Low Pass / Band Pass
Filter mode and slope Linkwitz @ 12 / 24
Butterworth @ 6 / 12 / 18 / 24

Audio DSP and converters
32 bit Cirrus Logic (Clock speed: 147 MHz) Digital Signal Processing chip and A/D D/A converters working in PCM at 48 kHz with 24 bit resolution. The processor speed allows the user to hear and verify in real time the changes applied during the tuning.
Audio Inputs
4 independent high-level channels with automatic summing capability and USS (Universal Speakers Simulator), the technology that allows bit processors to work with headunits featuring the “speaker load detection” circuit;1 analog low-level stereo auxiliary input;1 high-level momentary audio interrupt input (with priority) on Phone Mute cable (settable through PC).
Audio Outputs
5 independent analog PRE channels featuring adjustable level.
Control Connections
1 USB /B (2.0) connector for PC connection; 1 AC Link control bus connectors for DRC; 1 input for external Mute (settable through PC).
Configuration
Guided procedure that, thanks to a wide range of set names, provides the ability to assign each component to the bit Ten connections and automatically coordinate their functioning.
Turn-on Controls
ART, Automatic Remote Turn on/off, selectable from Hi-Level Front L. The ART can be enabled through an external switch;Through the Remote IN;Through the car ignition key with memory function;Through the DRC (optional);Automatically through the hands-free phone kit.
In/Out Volume
Input sensitivity manual adjustable for the Master Hi-Level inputs (with supplied Test CD);Manual input sensitivity adjustment for auxiliary inputs;Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB).
De-equalization
Automatic de-equalization of signal fed into the high-level inputs (with supplied Test CD) if necessary. It can also be performed without the PC.
Equalizers
31-band graphic equalizer (1/3 Oct.; ±12 dB) for each output channels.
Crossover Filter
Filter typology: selectable; Hi-pass, Lo-pass, Full Range, Band pass with independent selectable cut-off slope.Cut-off frequency: 70 steps available from 20 Hz to 20k Hz;Cut-off slope: selecable; 6 to 24 dB/Oct.;Selectable alignment: Linkwitz or Butterworth;Mute: selectable for each output (On/Off);Phase: selectable for each output (0°/180°);
Signal channels reconstruction
It can reconstruct a stereo output signal from a multi-channel input signal. In addition it can reconstruct rear, centre and subwoofer output channels from a stereo input.
Time Alignment
Guided procedure for the speaker distance data entry with an automated calculation (distan-ce to time) for each channel for accurate delay times. System also provides for manual fine tuning of delay (0.02 ms fine set).
DRC
(optional)Master Volume, Subwoofer Volume, Balance and Fader controls, Input selection, Memory selection, Adjustable display brightness.
Memory
2 presets separately managed and recalled by the DRC (optional).
bit Ten software
Windows (XP, 7 and Vista) based software with “Standard” and “Expert” operating modes;Screen resolution: 1024 x 600 px min.

Product Features:

  • 32 bit DSP
  • Automatic De equalisation
  • 31 Band Graphic Equaliser
  • Time alignment
  • 2 preset memory (with DRC)
  • Adjustable Crossover
  • Optical Input (bit TenD)
  • Digital Output (bit TenD)
  • Dash Remote Control (optional on bit Ten)
  • High-Level input with signal summing
  • Aux Input
  • 5 Channel RCA output
  • 5 Turn On options
  • In/Out level adjustment
  • Hands-free input with audio mute

 

 

Free Shipping - Use Code 'Audisonfree'
More Information
Price £339.99
Manufacturer Audison
Vehicle Manufacturer None
Write Your Own Review
You're reviewing:Audison Bit Ten Signal Interface multi-function digital Processor
Your Rating
Free Shipping - Use Code 'Audisonfree'